Showing posts with label PCRAM. Show all posts
Showing posts with label PCRAM. Show all posts

Tuesday, June 23, 2009

Samsung and Numonyx Drive PCM Adoption

Samsung and Numonyx today announced that they will jointly develop common specifications for phase change memory (PCM). Common specifications are necessary to drive the adoption of PCM, particularly since OEMs do not want to be beholden to one supplier. The development of common specifications is analogous to what Intel and ST did in NOR flash starting with the 90nm NOR flash generation and resulted in Intel and ST being dual sourced at major OEMs.

The bit alterability of PCM make it attractive in simplifying firmware and reducing system overhead, however, adoption of PCM will likely be limited until costs approach that of flash memories. With a 45nm 1Gb PCM chip scheduled for production for the end of 2009, Numonyx will be closing the gap with NOR flash, however it'll take much longer for a new memory technology to break out of its niche status, if at all. Just take a look at where FRAM and MRAM are today.

This colloboration is the right step to facilitate the development of the infrastructure supporting PCM. Samsung's backing is a validation of the technology and also provides OEMs the confidence to commit themselves to this emerging memory technology.

Monday, February 11, 2008

Flash Memory Replacement Achieves Major Milestones

At last week’s ISSCC, Intel and STMicroelectronics presented a paper demonstrating the first multi-level cell phase change memory [PCM]. The chip is a 256Mb device based on 90-nanometer process technology. PCM has been touted as a potential replacement for flash memory due to its fast reads and writes and superior endurance.

On the same day of the ISSCC paper, Intel and ST began shipments of prototype samples to customers of a 128Mb chip also based on the same 90nm technology. Careful reading of the ISSCC paper implies that the 256Mb MLC device and the 128Mb device are one and the same chip. The MLC technology is still in the research phase and it appears the prototype samples have the MLC functionality disabled.

The 128Mb product is mainly a learning vehicle to improve the technology for volume manufacturing, to learn about which applications may be suitable for PCM and to develop the firmware to support the devices. Due to the high initial cost of PCM, the 90nm devices will have limited production volume, however, this is expected to change as PCM migrates to more advanced process technologies and MLC technology is deployed.

PCM’s time will come as flash memory encounters scaling limitations within the next five years.